Products
SZD-1
SZD-2
SZD-3
SZD-4
SZD-5
SZD-6
SZD-7

SZD Multi Contact Molding Machine

SZD multi contact molding machine is applicable to the modeling of clay sand upper and lower boxes in various casting workshops. It can be used alone or in a mechanized assembly line, or in a semi-automatic line. It uses pneumatic multi contact compaction without oil leakage, with moderate specific pressure, no special requirements for sand mold, and a large number of contacts (36-126).


It is suitable for complex model modeling and compaction. The frame is not stressed, Instead, four pull rods are hung from the side of the multi contact body to hook the workbench. As the multi contacts extend downward, the contacts compact the sand mold on the one hand and vibrate with the workbench at the same time. The sand mold has a high and uniform hardness. The sand consumption can be as small as 20-30 mm, and the sand ratio can reach h:b=2~3. The hardness of the vertical surface of the cavity can still reach more than 80. The spring fully buffered pneumatic microseismic mechanism is used, Therefore, there are no special requirements for the foundation. The connecting rod synchronous shaft structure is adopted for formwork lifting, and the air pressure oil speed regulation is adopted. The formwork lifting synchronization is good, and the speed can be controlled freely.

Technical specifications
ItemSZD0806BSZD1907SZD1008
Sand box inner size(mm)800x630x3001520x1220(1320)x1901000x800x300
Worktable sie(mm)950x7301980x10801150x850
Working air pressure(mpa)0.58≥0.55≥0.55
Muti contact compaction stroke(mm)200250200
Jolting load(kgf)650750750
Productivity(half box/h)
35-4035-4035-40
Free air consumption (m3/half box)
2.532.5
Contact quantity(pcs)486080
Total weight56.58.5


Inquire now
Related products

0086-532-88165767

Email: info@rollytechmachinery.com

Email: rollytechchina@gmail.com